|
EQUIPMENTS
Ceramical Stove: Auto Therm 200
 |
Auto Therm 200 VPF The Main Features at a Glance
- 200 Separated Definable programs
- New Quartz Spiral Muffle
- Viewing All Parameters in Graphical LCD at a Glance
- User Frindly and Easy to Operate
- On line Multi Language Help (English, Arabic, Persian, Russian …)
- Advanced Automatic Temperature and Vacuum Calibration System
- Intelligent Error and Fail Detector System
- Maximum Temperature Accurancy in Iow and High Temperatures
- Possibility of Changing Programs During Execution
- Including NIGHT, IDLE, DRY, and CALIB Programs
- Error Message When Entering Incorrect Temperatures, Time and Vacuum Level
- Programmable Lift Door Position for Pre-Drying Stages
- Advanced Chip Technology for Automatic Program Control
- Including High Quality Oil Free and Noise Less Vacuum Pump
|
 |
TECHNICAL DATA:
Max. Power Consumption: 1600 W
Max. Temperature: 12000 C (22000 F)
Operating Voltage: 180 ~ 240 V AC -50/60 Hz Muffle:
Accepts any Restoration 9 cm x 54 cm Height Dimensions:
39 cm Width x 37 cm Depth x 54 cm Height Fuses: 1A
Net Weight: 21.5 Kg
Vacuum Pump: 220 V – 200 W |
 |
* * *
Sandblast
* * *
Vacum mixer
 |
Auto MIX - 80 The Main Features at a Glance
- Internal compact oil less vacuum pump
- Easy to use and user friendly
- High reliability &safety
- Adjustable timer
- Vacuum level indicator
- Permits reset the timer and repeat the mix operation
- Emergency vacuum – drain valve for the power failure
- Ending time alarm
- Optional wide range timer(0.2 Sec. – 30 Min)
|
TECHNICAL DATA:
Power supply: 220 V AC – 50 Hz
Max power consumption: 85 w
Motor speed: 400 rpm
Dimensions:
28 cm width x 28 cm depth x 47 cm height
Net weight: 17 kg
Vacuum pump: 24 VDC – 20 w
Max. vacuum/bowl pressure abs:
approx. -870 mbar
Bowl size: 250 ml, 500 ml
* * *
Hydrauli Press
 |
HYDRAULIC FLASK PRESS
- The press plate has a stroke of 35 mm and returns automatically after venting.
- It can hold up to three flasks or with the compact flask spanner up to two flasks.
- Modern modular design: pump and press cylinders are separate and individually replaceable.
- The pressure can be checked on the gauge.
- Easy to use.
|
TECHNICAL DATA:
Height: 570 mm
Width: 210 mm
Depth: 360 mm with lever
Press plate diameter: 123 mm
Vertical clearance: max 220 mm
Clearance between up rights: 128 mm
Capacity: max. 50 mm
Piston pressure stroke: 35 mm
Net weight: 27.5 kg
* * *
Sunny Therm – 1
 |
Microcontroller – Controlled
Preheating Furnace for Crowns
Bridges & Codalt – Chrome Castings
The Main Features at a Glance:
- Microcontroller Embedded Controller System
- Wax Removal and Heating for Crown & Bridges, Cobalt Chrome Casting Up to 1150o C
- Compact All – Roud unit with mould compartment for up six 180g mould
- 10 Free Programmable memory with possibility to change all parameters
- Easy to use, User Friendly operation and Easy to service
- Programmable Heat rate and temperature in 3 separate stages
- Weekly timer (100 hours)
- Digital 7 – Segment Display to view all parameters at a glance
|
 |
TECHNICAL DATA:
Max. Temperature: 1150 o C (2100 o F)
Max. Power Consumption: 1800 W
Power Supply: 220V -50/60Hz
Overall Dimensions: 38 cm width x 38 cm depth x 48 cm height
Heating chamber Dimensions: 16 cm width x 16 cm depth x 10cm height
Volume/number of Rings: Approx. 6 Rings
Net Weight: 25 Kg |
* * *
Anyxing 300D
 |
Best powerful model
Digital Speed Display (50,000 rpm) (35,000 rpm)
Easy Potable and Desktop style Design
Available with Foot speed control pedal or On/Off pedal
Variable speed control by Hand knob or Foot pedal
Easy direction changing system by Forward/Reverse button
Automatic Overload alarm system and Reset function
Handpiece cradle (stand)
|
* * *
Anyxing 300S
 |
Digital Speed Display (50,000 rpm) (35,000 rpm)
Easy Potable and Desktop Slim Design
Available with Foot speed control pedal or On/Off pedal
Variable speed control by Hand knob or Foot pedal
Easy direction changing system by Forward/Reverse button
Automatic Overload alarm system and Reset function
Handpiece cradle (stand) |
* * *
Anyxing 300B
 |
Digital Speed Display (50,000 rpm) (35,000 rpm)
Dom style Design for stabile work
Various color options (BLACK, IVORY)
Available with Foot speed control pedal or On/Off pedal
Variable speed control by Hand knob or Foot pedal
Easy direction changing system by Forward/Reverse button
Automatic Overload alarm system and Reset function
Handpiece cradle (stand)
Built in Burr holes
|
* * *
NX-400
 |
Dual Output System
Available with two different handpieces for multi uses by turns
Speed Adjustable (up to 50,000 rpm)
Available with Foot speed control pedal only
Variable speed control by Hand knob or Foot pedal
Easy direction changing system by Forward/Reverse button
Automatic Overload alarm system and Reset function
Handpiece cradle (stand) |
* * *
MASTER II
 |
Massive color
Speed Adjustable (up to 50,000 rpm)
Available with On/Off foot pedal only
Variable speed control by Hand knob
Easy direction changing system by Forward/Reverse button
Automatic Overload alarm system and Reset function
Handpiece cradle (stand) |
* * *
NX-100S; NX-100P; NX-200P
* * *
Super Alloy
* * *
Partial Premium
|
